Five-axis machining center introduction
The five-axis machining center is suitable for machining complex shapes of parts and molds, such as complex curved parts, shaped parts, etc. These odd-shaped parts can be machined using a five-axis machining center, and the precision of machining with a five-axis machining center is very high, and the workpiece can be Get a high quality surface. The five-axis machining center mainly covers a wide range of fields, including aviation, aerospace, military, scientific research, high-precision medical equipment and high-precision molds.
The five-axis machining center has a significant influence on the development of core industries in these countries. There are many types of five-axis machining centers. There are three types commonly found in the domestic market. These three types are classified according to the installation positions of the two rotary axes of the five-axis machining center.
Which type of five-axis machining center is selected depends on what type of product or type of mold the customer processes, so different types of five-axis machining centers are selected to process different types of products or molds.
The five-axis machining center table is equipped with two rotating shafts
Such five-axis machining centers are common on the market, and parts or molds that process small, complex surfaces use such five-axis machining centers.
The two rotating shafts of such a five-axis machining center are mounted on a table, which is a rotating A-axis and a C-axis or a rotating B-axis and a C-axis, respectively. Such a five-axis machining center is not suitable for heavy loads, and large parts cannot be machined due to the limited size of the table of the rotating shaft.
The spindle of the five-axis machining center is equipped with two rotating shafts.
These five-axis machining centers are rare on the market and use fewer customers to process larger workpieces. The two rotations of this type of five-axis machining center are mounted on the main shaft, which are the rotating B-axis and C-axis or the rotating A-axis and C-axis. These five-axis machining centers are more suitable for heavy loads.
A rotating shaft is mounted on each of the main shaft and the table of the five-axis machining center.
This five-axis machining center is rare in the market, except for special complex-shaped parts that can be used in such five-axis machining centers. Such a five-axis machining center is respectively mounted with a rotating shaft on the table and the main shaft, and the two rotating shafts are an A-axis and a C-axis, respectively. This type of five-axis machining center can be used to mount larger workpiece